50m Wireless HDMI Extender

Please read this manual carefully before you use this product and retain it properly for future reference.
If there is any doubt or difficulty in the process of product usage, please feel free to contact us or the dealer.

The company reserves the authority to amend the specification.



Brief Introduction :

1.This wireless HD Video solution enables wireless transmission of video/audio from any HDMI video source such as PC/HDTV todisplay devices includes HDTV/HD Monitor over the 5GHz band, with very low latency.

2.It does not require any special configuration or software driver installation - simply connect
the transmitter to the HDMI output of the video source and the receiver to the HDMI input of the Panel/TV/Monitor. Its Plug & Playoperation makes it the ultimate solution for the most demanding indoor/outdoor professional environments.


3.This solution is widely applicable to family entertainments, office presentation, lecture, education, medical treatment, party, conference, etc.




Features :

1. Support HD devices with HDMI input/output, include Blu-ray player, DVD player, PC, laptop, HDTV, etc.
2. 5GHz Wireless HD video transmission Support multi resolution up to 1080P
3. HDMI Input/Output, support multi devices with HDMI
4. Low latency - < 100ms
5. Effective range: 50m (Line of sight)
6. WPS transmitter - receiver pairing
7. Plug & Play - full hardware design, no software is required
8. AES128/256 Encryption


Structure & Interface:
The Transmitter
1. DC Power: Power socket for DC adapter.
2. HDMI IN: Connect to HD Video source device such as DSLR/DV, Blu-ray Player, Laptop, HDTV, etc.
3. USB:  USB socket for upgrading.
4. Pairing: For devices paring, use a pinpoint to press for about 5 seconds then release, the devices will be paring.
Channel Switch: Press to change the channel
5. LED indicators: RED for Networking; Green for Video
6. IR OUT Socket: Connect with IR extension connector to transmit IR signal


The Receiver
1. DC Power: Power socket for DC adapter.
2. HDMI Output: connect to HD display device such as HDTV, Projector, LED Screen, etc.
3. USB:  USB socket for upgrading.
4. Pairing: For devices paring, use pin to push for about 5 seconds then release, the devices will be paring.
Channel Switch: Press to change the channel
5. LED indicators: RED for Networking; Green for Video
6. IR IN Socket: Connect with IR extension connector to receive the IR signal



packing list:
Please check the packing list carefully, if any parts is missed, please contact your dealer.
Components of all models are subject to the following packing list.
The adaptor may vary according to certain conditions in different country/region.



Product Installation:

1. Locate the transmitter and receiver respectively on thebase. * To avoid interference from other devices, please Donot place any barriers near to the devices.
2. Connect the power adaptor to the transmitter and receiver. Connect the IR
extension connector to the IR Output socket of transmitter, and put it properly in front of IR sensor area of video source;and connect the IR extension connector to the IR Input socket of receiver.
3.Connect the transmitter to the video source device via HDMI cable,
then power on the transmitter and video source device. Connect the receiver to the video display device, then turn on thereceiver & display device,
make sure the network and the video connected properly, the LED indicators will light ON.
4.wait for the system start, and the screen will display text"Connecting to transmitter."then the images shows up, which means the product is working.
5.When the system working properly, user can use theremote controller of HD player at the HDTV side. theremote controller should be aligned to IR connector of the receiver.
6. While connected, user can press the Channel Switch oftransmitter or receiver to change to other channel forbetter transmission.


specification:
 


Since the product's improving process , all the performance , design and specifications of our products are subject to minor change without prior notice.
indicatore